Sachtler aktiv10 Flowtech 100 GS Tripod System MFR #S2072S-FTGS (Head & Tripods)

Description

Sachtler aktiv10 flowtech 100 GS Tripod System
MFR # S20725-FTGS. List Price - ,900.00
The aktiv10 flowtech 100 GS Tripod System from Sachtler pairs the activ10 fluid head with the lightweight, carbon fiber flowtech 100 GS tripod with ground spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 26.5 lb. A padded carrying bag rounds out this tripod kit.
Sachtler aktiv10 Sideload Fluid Head with SpeedLevel & 7-Step Drag for Select Sachtler Tripods ((100mm Ball)
The aktiv10 Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate production, the aktiv10 supports camera rigs weighing up to 26.5 pounds. This 100mm ball fluid head also features 15 steps of counterbalance, seven steps of pan and tilt drag, and zero settings for both balance and drag.
The proprietary Sachtler SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.
When used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3/8"-16 threaded stud.
The active 10's PrismBubble is a built-in prism level with two viewing windows that enable you to more easily level the head when the legs are at set at maximum height or at an awkward angle. The bubble level also has two levels of illumination—press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag settings, a boon when working in darker environments.
Mount your camera using the included Sideload Plate S that has both a 1/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 4.7", this head balances quickly to accommodate variously configured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.
aktiv Fluid Head Compatibility
The aktiv10 is compatible with Sachtler 100mm tripods (flowtech 100, ENG 2 CF, ENG 2D, ENG 2 CF HD, SpeedLock, and SpeedLock CF HD)
Features
SpeedLevel Technology
Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place
SpeedSwap Base
Centered around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider
PrismBubble Level
The illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions
26.5 lb Capacity Fluid Head
This 26.5 lb capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs
Stepped Counterbalance and Drag
Fifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts
Sideload Plate S
The Sideload Plate S has 4.7" of travel for balancing your rig and both a 1/4"-20 camera screw and a locating pin
Sachtler flowtech 100 mm Carbon Fiber Tripod (Ground Spreader)
The Sachtler flowtech 100 Carbon Fiber Tripod with Ground Spreader eschews the common single or double carbon fiber tube design; instead it has redesigned the shape of the legs for improved torsional strength. The legs weigh 8.8 pounds, yet they can support a payload of up to 66 pounds, and extend from a minimum height of 16.9" to a maximum height of 62.6" when using the included removable ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground.
Features
Dual-stage, carbon fiber, 100mm bowl tripod.
Three 3/8"-16 accessory mounting holes are integrated into the outside of the 100mm bowl.
The legs by themselves weigh only 8.8 pounds but support up to 66 pounds.
The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
Each leg features a single clamping lever lock design at the top of the leg, near the 100mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a lock at the bottom to lower or raise the legs.
The legs incorporate a locking mechanism that enables the legs to move freely for working with a spreader, or to lock at one of three angles when working without a spreader.
With the spreader, the height range is 16.9 to 62.6". However, if you remove the ground spreader and utilize the built-in locking mechanism, the usable height range is 10.2 to 60.2".
Sachtler ENG 2 Padded Bag
The
Sachtler ENG 2 Padded Bag
is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 35" long. The case is made from water-resistant Cordura nylon and can be carried by the interlocking handles or the attached, adjustable shoulder strap.
Construction
Water-resistant Cordura nylon
Padded interior
Zipper closure
Carrying options
Interlocking handles
Attached, adjustable shoulder strap
Compatible with
Sachtler DV 2, DV 4, DV 6 and DV 8 systems on ENG 75/2 D tripod
Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 2-fold extension or Speed Lock CF tripods
We at Guru Enterprises in Chatsworth, CA thank-you for stopping by. Please keep us in mind for all your requirements in motion picture equipment in future.
We deal in both - New & Used Gear.
Feedback is very important to us. We would appreciate if you would leave it for us once you have received your item. It lets us know you have received your item and are happy with your purchase.
We request that you attempt to resolve a problem by first contacting us before leaving feedback as problems tend to be a straightforward case of miss-communication.
Buyers shipping within the 36 States that require collection of Internet Sales Tax will be subject to sales tax.
(California residents will have to pay 9.5% for sales tax.)
Free shipping in the US Mainland.
We guarantee each item we sell on eBay to be exactly as described. If a buyer receives an item and is not as described, they can return the item within 14 days for a refund. Email for more information.
We strive to offer courtesy to my customers. We hope that we have described the item to complete satisfaction. Please email with any questions if we have forgotten something.
SHIPPING
We ship Worldwide.
18
HAPPY YEARS OF SELLING & BUYING ON EBAY !
Buy with confidence ~ ~ check our excellent feedback!
FAST SHIPPING
All our items are
in stock
and
We strive to ship within 24 hours of payment.
12900