Tattoo Thermal Stencil Maker Tattoo Transfer Copier Printer Machine A4&A5

Description

Feature:
1.This tattoo transfer machine is designed for ordinary tattoo paper, which can provide effective transfer effects, especially for the line and complex patterns. For tattoo artists, this is indeed a good helper.
2.This tattoo printer has fast transfer printing speed, low heat, low noise and stable performance.
3.No replacement parts and No ink needed, Our tattoo stencil copier has no Bulbs, Cylinders, or Heating Elements, more economical than other traditional tattoo machines. Copier also set up for use with A4 and A5 paper sizes.
4.Cannot not connect with the computer or cellphone, if you need, you can choose another tattoo transfer machine in my store.
5.Plz remember that the color patterns, unclear line outlines and overly complex artwork cannot be directly transferred.
6.If you need the specific operating instraction or further help, plz feel free to contact with me any time.
Specifications:
Quantity: 1 x Transfer Machine
Scanning Mode: CIS
Effective Scanning Width: 210 mm
Horizontal: 8 dot / mm
Vertical: (Standard)3.85 line/mm
Document Type: Fine
Document size: A5-A4
Document Thickness: 0.06 mm-0.15mm
Recording Mode: TPH
Effective Printing width: 210mm
Weight: 1.99Kg
Color: Silver，Black
Measurement: 29*23*7cm
Coming with a simple separate carrying box: 40*29*15cm
Handy Introduction:
Copy in Mirror State
1, Open the copying paper cover.
2, Drawout the oilpaper; according to the picture, put the paper in and keep stencil paper up, pull the paper to the TPH side. Also, you can tear off the yellow paper and then put the paper.
3, Close the copying paper box.
4, Copied document should be faced down and put it into the feeder. When the document is catched, please press the key "COPY".
Copy in Normal State
Before copying, press key "MIRROR" to keep the mirror light quenching.
Notice:
1. Before usiing the mirror copy function, you should wait a few seconds for TPH heating; when the page is printed, the white paper of the copying paper should be stuck to TPH.
2. If you want to stop the copying mission, please press the key "STOP".
3. If the warning signal sounds, ERROR lights works and stop c opying immedistely.
4. Manual included.
Packaging:
1 x Transfer machine
1 x 3 Layer sheet A4 transfer paper
1 x English manual
1 x Power cord
FQA:
Q1: How to solve paper jam up problem?
1.If the machine is overheating, the paper will jam up, please wait for the machine to cool down（10min）, and then you can use it again.
2.First, Please feed the paper correctly, Make sure your transfer papers are not wet or dirty. You can try another transfer papers.
3.Plz remove the yellow layer before transfer the picture, and do not copy the complex and shading picture or the machine will become easy to over heating.
4.Open the machine cover, use the nonwovens and alcohol to clean the scanner, maybe it is because the ink in the scanner and stick the transfer paper.
Q2: How do i load the thermal paper?
Transfer side up thermal side down and lift the loading hatch load through the slot in the back and line it up evenly in the front and close the lid so it snaps into place. Flip the excess paper back and load your design face down into the front slot.
Q3: How come its getting the stripe down the middle of the stencil when it prints?
1.Try cleaning the rolls inside of the cover, using the nonwovens and alcohol to clean the White Rolls and Black Rolls inside the machine and do not leave the alcohol in it.
2.Make sure the scaner nor broken and do not fold the transfer paper.
3.Plz do not use the machine under the direct sunlight, because it will make the machine over heating
Q4: Is there a way to reverse my image or can I simply jus feed my design thru it upside down to reverse image since I don't have photoshop
Yes, it is a “mirror” buttom in the pedal, press it and you can get a mirror image
Q5: What is the function of the “photo” mode?
“Photo” can make your curve more vividly and nice performed. By the way, this machine also can be used to transfer the character and text, you don’t need the photo mode when you print it.
Q6: Can i print the shading picture?
I do not recommend to use the machine to print the shading picture, because it will make the machine overheating, and Easy to damage the machine.
Q7: The error light is on. what should I do for it to start working?
That might be the machine is overheating, please do not print too many picture once. Opening the machine cover and wait it naturally lose heat.
We always offer different plugs upon the location of our customers.You also can leave a messenger for your order. We will do upon your request and make everything well.
If you want fast shipping. Pls choose DHL,We can provide lower shipping cost .Thanks